انجمن هنری خانه دا
Recommended Mechanical Properties And Industrial Materials Tips. FastTip#62 - نسخه‌ی قابل چاپ

+- انجمن هنری خانه دا (http://forum.dahouse.ir)
+-- انجمن: تئاتر (http://forum.dahouse.ir/forum-1.html)
+--- انجمن: نقد تئاتر (http://forum.dahouse.ir/forum-2.html)
+--- موضوع: Recommended Mechanical Properties And Industrial Materials Tips. FastTip#62 (/thread-51700.html)



Recommended Mechanical Properties And Industrial Materials Tips. FastTip#62 - FrankJScott - 2021/08/18

International Standards For Mechanical Properties and Industrial Substances
Note: Factory conditions are designed to protect the glue joints from dirt or lead weathering, ensure that any movement occurs during curing in check , and to maintain the precise temperature and humidity levels in an industrial environment. This document also covers glue-in sticks made from timber treated. This document doesn't cover glued in rods made from modified and stabilized lumber with significantly decreased shrinkage and swelling. The document does not cover glued-in rods made of modified and stabilized lumber with significant shrinkage or swelling reduction. These joints are made to be used on timber frames with load bearing capabilities that fall within service classes 1 or 2, according to EN 1995-1-1. They also have a tendency to be quasistatic or static, according to EN 1990-1-1-1 as well as EN91-1-1. They are suitable for structures that are load-bearing and that are not exposed to temperatures of more than 60 degrees Celsius. If your technical base is clear, the standard can be used to suit your business. Find a firm that is familiar with international criteria selection to help you select the appropriate standard.

Two-component epoxy and polyurethane adhesives for on-site repair of cracked timber structures- Testing, requirements and repair strength verification EN 17418:2021
It is essential to employ evaluation techniques when designing a productive system. We have already spoken about this topic many times. This stage can be performed in virtually every field of production. EN 17418-2021 is an additional important standard that governs the test procedures and their requirements. This document describes the requirements and testing procedures for polyurethane and two-component epoxy adhesives which can be used to repair and maintain cracks in timber timber timber structures constructed from strong-graded structural timbers, with rectangular cross-sections, structural finger-jointed lumber, and glue-bonded timber. Fix adhesives are injected with a glue line thickness of up to 8 millimeters.

The adhesive can be used to repair the cracks created by screws, nails dowel-type attachments and dowels that have threads. This section covers only adhesives that comply with Clause 8. This section covers wood repair. This glue is designed to be used on wood structures that are able to withstand loads but are not exposed to temperatures that exceed 60 degrees Celsius within a short period of time, as per EN 95-1-1. These structures are able to be loaded in a quasi-static or static way. See EN 1990-1-1 and EN 1991-1-1, for more information.

We suggest that the hyperlink to the site be accessed to learn more regarding the records available. This is where you are likely to find standards that will help improve the system of your business.

Plastics- Determination of dynamic mechanical properties- Part 3: Flexural vibration- Resonance-curve method (ISO 6721-3:2021) EN ISO 6721-3:2021
Plastic is being cut due to of the environmental effects. But, EN ISO 6721-3:2021 is one of many regulatory acts that are being developed to regulate the processes that come into contact with the substance. This document describes a method to measure the flexural complex homogeneous polymers' modulus with bending vibration. It uses resonance curves. This document also outlines damping properties of laminated plastics which are intended to be used as an acoustic insulation material. These properties can be used for calculating frequency and temperature to serve a variety of needs.

It is highly recommended to have this standard on hand for the event that your actions are in direct or indirect contact with any of the above-mentioned materials and equipment. This will help ensure that your system is in line with global market requirements. This will keep your business on top.

It is crucial to establish international standards in an organization.
Global standards may not appear essential for local manufacturing or business on the surface. Globalization is now becoming an increasingly important aspect. By planning for the international market ahead of time, it is possible to improve the competitiveness of a business. We're here to assist you in selecting international documents that will be appropriate for your business or organization.